A Review of the Bostitch M111FN Flooring Nailer

The Bostitch M111FN flooring nailer is useful for installing hardwood flooring. The tool is designed to make the process as efficient and comfortable as possible. You can find the Bostitch M111FN for a price between $450 and $550. Let’s take a look at some of the features provided with this flooring nailer.

The Bostitch M111FN flooring nailer is designed to drive 1 1/2-inch to 2-inch L-shaped flooring cleats. The nails have serrated edges in order to keep the nails from backing out. It will also help reduce squeaking from the hardwood floor. The high-capacity magazine can hold up to 111 cleats at a time. This will effectively reduce the amount of time you spend reloading so that you can get on with your work.

The Bostitch M111FN is equipped with a 3/8-inch NPT air inlet. The nailer requires an operating pressure between 60 and 100 PSI. The tool provides a driving power of 420 inch-pounds. This is more than enough power to drive nails into harder woods.

This flooring nailer will dramatically increase your production over using manual methods. The Bostitch M111FN features high-speed mallet actuated operation. The pneumatic operation will assist you in driving nails much easier. Also, the Bostitch M111FN is designed to drive the L-shaped flooring cleats at the proper depth and angle.

The Bostitch M111FN also features an extra-wide base plate. This base plate is designed to provide additional stability for the flooring nailer. The Bostitch M111FN is packaged with two base plates that measure 1/2-inch and 3/4-inch.

You will also appreciate the fact that the Bostitch M111FN flooring nailer has an ergonomic design. The nailer also has a long reach handle so that you can control the tool easily. The handle also provides additional comfort. You will also like the fact that the Bostitch M111FN only weighs 11 pounds so you can use it for extended periods of time.

If you want to speed up the time it takes to install hardwood flooring, then you should consider investing in the Bostitch M111FN. This flooring nailer is designed to drive 1 1/2-inch to 2-inch L-shaped flooring cleats. Operating at a pressure between 60 and 100 PSI, the Bostitch M111FN can deliver up to 420 inch-pounds of driving force. You will also appreciate the ergonomic design and the long-reach handle that provides additional comfort.

Leave a Reply

Your email address will not be published. Required fields are marked *


nine + 6 =