A Review of the Dewalt D51431 Crown Stapler
The Dewalt D51431 is designed to fire 16-gauge staples with a crown size of 1/2-inch. The tool can hold staples that have a length between one and two inches. The magazine used for the Dewalt D51431 is a top-loading, straight angle design. It also has a generous capacity as it can hold 160 fasteners.
The Dewalt D51431 is packaged with bump-fire trigger. There is also a sequential trigger included so that you can replace the standard bump-fire design. The Dewalt D51431 also includes a trigger lock-off for additional safety whenever you are not using the tool. The lock-off will prevent the stapler from firing accidentally.
You will also appreciate the 360-degree adjustable exhaust. You can adjust the exhaust on the Dewalt D51431 with a simple twist from your hand without the use of any tools. This will allow you to move dust and hot air away from you while you’re using the tool. The Dewalt D51431 also features an indexed depth adjustment. You can achieve the perfect depth every time thanks to the fact that the indexed depth adjustment is lockable.
Another nice feature of the Dewalt D51431 is the nose design. The nose area has less clutter so that you can clearly see where you’re firing the stapler. Also, the Dewalt D51431 allows you to remove bent staples that jam the tool. You simply have to flip a latch on the nose piece and it will open and allow you to clear the jam.
The Dewalt D51431 has an operating pressure between 70 and 120 PSI. At 100 PSI, it can achieve a cycle rate of 20 staples per second. The Dewalt D51431 is also lightweight so that you experience less fatigue when using it for long periods of time. It only weighs 4.5 pounds.
If you’re looking for a medium crown stapler, you should take a look at the Dewalt D51431. It is packaged with a bump-fire trigger, but you can replace it with a sequential trigger that’s included in the package. The Dewalt D51431 also features a 360-degree adjustable exhaust.
