Five Tips for Cleaning Epoxy Floors

Epoxy floors are stronger and more resistant to chemicals that many other types of floors. This type of flooring will last a long time if you maintain it correctly. If you have this type of floor, there are a few things you should know about cleaning it. This article will give you a few tips for cleaning epoxy floors.

Abrasives

You need to make sure you remove debris, dirt, and dust from epoxy floors. Although these floors are non-porous and can’t be penetrated by these substances, they will act like abrasives. If you don’t remove them, they may start to damage the floor when traffic goes over them. Therefore, you need to make sure they are thoroughly cleaned on a regular basis.

Cleaning Compounds

You can use regular cleaning compounds on epoxy floors if you use them properly. After using these cleaning substances, you need to rinse the floor. Some cleaning compounds contain chemicals that can damage low quality epoxy floors if they are left on the floor for a long period of time. Therefore, you need to rinse the floor thoroughly after using these cleaning substances.

Scrubbing

If you need to, you can also scrub epoxy floors. It’s best to use a scrub brush with soft bristle. After you have scrubbed the floor, there may be residue left behind. You should remove this residue by rinsing off the floor at least twice after scrubbing it.

Moisture

You also need to pay attention to the level of moisture around epoxy floors. This type of flooring is not suited for areas that are constantly wet or at risk of becoming flooded. If you thought about using epoxy floors for this type of area, you should change your mind immediately.

Soap

Although you may be tempted to, you should never use soap on epoxy floors. If you use soap, it will leave a film behind on the floor. This film can become very slippery when it is combined with water. Therefore, you should never use soapy water to clean epoxy floors.

These are a few tips for cleaning epoxy floors. You always need to remove dirt, dust, and debris because they can act like abrasives and damage the floor when traffic goes over them. You should also never use soapy water to clean epoxy floors. The soap will leave a film behind that will become very slippery when it gets wet.

Leave a Reply

Your email address will not be published. Required fields are marked *


× 7 = forty two